Komatsu — DOWNLOADING DATA

OM6012 2/11 Payload Meter III - Section 60 Page 60-13 PDM SOFTWARE OVERVIEW The Payload Data Management (PDM) software has several basic functions: DOWNLOADING DATA PLMIII records many types of data. The PDM software is designed to download the data from a whole truck fleet. Instead of creating one data file for each truck, the software combines all the data from many trucks into a single Paradox database on the computer’s hard drive. Users can then query the database to create custom reports and graphs. Data for individual trucks or groups of trucks can be easily analyzed.

This same data can be exported for use in other software applications such as spreadsheet applications and word processors. Configure the PLMIII system on the truck. Troubleshoot and check the PLMIII system. Download data from the PLMIII system. Analyze data from the payload systems. Configuration, troubleshooting and downloading require a serial connection to the payload meter on the truck. Analysis can be done at any time without a connection to the payload meter. As the database grows, performance of the software for analysis will slow down. It may be helpful to periodically export data.

For example, query the database to show the oldest quarter, month, or half year and print out a summary report. Then export the data to a compressed format and save the file in a secure location. Once the data is exported, delete the query results from the database. If necessary, the data can easily be imported back into the main database for analysis at a future date. Removing this older data will improve performance. Payload data is downloaded from several trucks into one database on the computer. The database can be queried to look at the entire fleet, one truck or one truck model. The data can be graphed, reported, imported or exported.

The export feature can ave payload data in a format that spreadsheet programs (like Excel) or word processing programs can easily import. System Configuration PLMIII needs to be configured for operation when it is first installed on the truck. This process requires a laptop computer and can be broken down into several steps: To move the data to another computer, a query must be run to isolate the particular data for export. Do not press the operator switches on the dash panel while downloading.

Connecting the laptop to the PLMIII system Starting communications Setting the time and date Setting the truck type Setting the truck ID Setting the speedometer/load display units Installing the PDM Software The CD-ROM containing the PDM software should automatically begin installation when it is inserted into the drive on the PC. If this does not happen, the software can be installed by running the Setup.exe program on the CD-ROM. To download the payload meter data: The minimum PC requirements for running the software are a Pentium 133Mhz with 64 MB of RAM and at least 300 MB of free hard drive space.

For improved performance, the recommended PC would be a Celeron, AMD K6-2 or better processor with 128 MB of RAM running at 400 Mhz. The PDM software uses a powerful database to manipulate the large amounts of data gathered from the PLMIII system. Using a more powerful computer and more memory can result in a significant improvement in performance. The software is written to use a minimum 800x600 screen resolution. 1. Connect the computer to the payload meter and start the PM software. 2. From the main menu, select "Connect to Payload Meter". The software will request the latest status information from the payload meter. The number of haul cycles and alarms will be displayed. 3.

Select the "Begin Download" button. The software will request the payload and alarm data from the payload meter and save it into the database. This may take several minutes. A progress bar at the bottom of the screen will show the approximate time left.