Komatsu — Payload Meter

OM3232 8/11 Operator Cab And Controls - Section 32 Page 32-7 Ashtray Ashtray (8, Figure 32-3) is to be used for extinguishing and depositing smoking materials only. Ensure that all ashes are extinguished. Do not deposit flammable materials such as gum wrappers and tissues. DIAGNOSTIC PORTS Drive System #1 Diagnostic port (1, Figure 32-4) is used to access diagnostic information for the AC drive system. Engine (QUANTUM) Diagnostic port (2) is used to access diagnostic information for the engine monitoring system. Lighter Lighter (9, Figure 32-3) may be used for lighting cigarettes and cigars. It may also be used as a 12VDC power supply.

Drive System #3 Diagnostic port (3) is used to access diagnostic information for the AC drive system. Engine (CENSE) Data Store Button Diagnostic port (4) is used to access diagnostic information for the engine monitoring system. This button (10, Figure 32-3) is for use by qualified maintenance personnel to record in memory a “snapshot” of the AC drive system. Operators can also use this feature during times when the truck is not operating correctly to record potential problems. Interface Module Diagnostic port (5) is used to connect the interface module to a computer for installing software.

Service Engine Light VHMS Service engine light (11, Figure 32-3) is a blue indicator that will illuminate if a problem is detected by the electronic engine monitoring system. Diagnostic port (6) is used to download truck operation data from the VHMS controller. Payload Meter Diagnostic port (7) is used to download data from the payload meter system. Refer to Section 60, Payload Meter III, for a more complete description of the payload meter and its functions. Electric propulsion and dynamic retarding will still be available.

If this light is ON, notify maintenance personnel so they can diagnose and repair the problem the next time the truck is in the shop for repairs or at the next maintenance interval. 12V Auxiliary Power Outlets Outlets (12, Figure 32-3) can be used to provide 12VDC power for tools and accessories. FIGURE 32-4. DIAGNOSTIC PORTS (BOX BEHIND OPERATOR’S SEAT) 1. Drive System #1 2. Engine (QUANTUM) 3. Drive System #3 4. Engine (CENSE) 5. Interface Module 6. KOMTRAX Plus 7. Payload Meter