OM3232 8/11 Operator Cab And Controls - Section 32 Page 32-9 PASSENGER SEAT (STANDARD SEAT) The passenger seat provides a fully adjustable cushioned ride for driver comfort and easy operation. Seat Belts On both driver and passenger seats, check the seat belt fabric, buckle, all belt retractors and hardware for damage or wear. Replace any worn or damaged parts immediately. Even if there are no signs of damage, replace both driver and passenger seat belts 5 years after seat belt manufacture, or every 3 years after start of use, whichever comes first. The passenger seat belt date of manufacture label is sewn into the seat belt near the buckle.
The driver seat belt date of manufacture label is sewn into the shoulder harness belt, near the retractor end. Adjustment The following adjustments must be made while sitting in the seat. Refer to Figure 32-6. 1. Fore/Aft Location of Seat Cushion (if equipped) - Lift and hold lever (1) and move the seat cushion to a comfortable position. Release the lever to lock the position adjust- ment. 2. Seat Height - Pull up on handle (2), then adjust the height of the seat. When the desired height is reached, release the handle. FIGURE 32-6. PASSENGER SEAT CONTROLS 1. Seat Cushion Fore and Aft 2. Seat Height 3. Weight Adjustment 4. Fore and Aft 3.
Weight Adjustment - Rotate knob (3) until the weight indicator next to the knob is pointing to the weight of the person that will be riding in the seat. This will provide the most comfortable ride setting. 4. Fore/Aft Location of Seat - Lift and hold lever (4) and move the seat to a comfortable location. Release the lever to lock the fore/aft location.