Komatsu — Warning Light

Operator Cab And Controls - Section 32 8/11 OM3232 Page 32-16 Mode Switches Mode switches (20) and (21, Figure 32-8) are two-way momentary rocker switches. The arrows are used to toggle through the different options and messages on the digital display. The OK position is used to acknowledge and clear warnings and faults and set certain Payload Meter III settings. Right/Left Turn Signal Indicators Indicators (23, Figure 32-8) illuminate to indicate that the right or left turn signals are operating when the turn signal lever on the steering column is moved upward or downward. Moving the lever to its center position will turn the indicator off.

Digital Display Contrast Buttons Cold ambient operating temperatures may affect the contrast of the digital display. If necessary, use buttons (24, Figure 32-8) to increase or decrease the contrast of the digital display to make it easier to read. Refer to Digital Display Operation later in this section for more information about using the digital display. Refer to Section 60, Payload Meter III, for a more complete description of the payload meter system and its functions. Warning Light Red warning light (25, Figure 32-8) will come on to indicate that a truck function requires immediate action by the operator. Safely stop the truck and notify maintenance personnel.

A warning message will appear on the digital display. Panel Illumination Light Dimmer Switch Panel illumination light dimmer switch (22, Figure 32-8) is a rheostat which allows the operator to vary the brightness of the instruments and panel illumination lights. Rotating knob to the full counterclockwise position turns panel lights on to brightest condition. Rotating knob clockwise continually dims lights until the OFF position is reached at full clockwise rotation.