. OPERATION EXPLANATION OF COMPONENTS FUSE BOX II CIRCUIT BREAKER FOR MAIN POWER SUPPLY If the starting motor does not crank, even when the starting switch is turned to the ON position, open the battery box and check breakers (A) and (B). If there is a surge of current, the circuit breaker shuts off the circuit to protect the electrical components and wiring from damage. Turn the starting switch to the OFF position and reset the circuit breaker. When resetting the electrical circuit after it has been shut off, press the reset button 5 to 10 minutes after the circuit has been shut off.
When the electrical circuit has been shut off, the operation of the reset button is heavier than when the circuit is normal. The height of the reset button is the same, regardless of whether the circuit has been shut off or has been reset, so make note of the effort of the reset button when resetting the circuit. Do not keep the circuit breaker reset button longer than necessary. If the starting motor does not work even when the circuit breaker has been reset, contact your Komatsu distributor. REMARK The capacity of circuit breakers (A) and (B) is as follows. (A): 30A (for regular cab power supply) (B): 105A (for general power supply) 3 - 54 NO.
Fuse capacity Name of circuit (1) 10A Car radio, cigarette lighter, room lamp (2) 10A Rear wiper (3) 10A R.H. wiper (4) 10A Front wiper (5) 10A L.H. wiper (6) 20A Additional front lamp (7) 20A Additional rear lamp, revolving lamp (8) - Spare (9) - Spare (10) 10A Radio memory