. OPERATION OPERATION CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING after the engine is stopped and may cause serious burns. Wait for the oil the 3 - 91 Parts and oil are a t high temperature immediate temperature to go down before performing this o 1. Open the en gine side cover on the righ t side of the c hassis. 2. Remove dips tick (G), and wipe the oil o ff with a cloth . ve it. 3. Fully insert d ipstick (G) into filler pipe (F ), then remo ve it. 4. The oil level should be between the H ENGINE ST If the oil leve OPPED side of dipstick (G l is below the L mark, add oil through oil filler 5. If the oil is a bove the H mark, remove drain plug (1 drain valve ( again. 6.
If the oil leve 2) to drain the excess oil, t hen check th e oil l close the en REMARK When checkin g the oil level after the en gine has bee n operated , wait for at l east 15 minutes a engine before checking. is at an angle make it horizontal before checking. oil, remove the dipstick form the holder to release the air inside the crankcase. If the machine is at an angle make it hor izontal befor e checking When adding oil, remove the dipstick for m the holder to release the air insid The dipstick is marked with the levels for "ENGINE ST OPPED" o n one side a nd "ENGINE IDLI side.
It is also poss · Check oil wh · Read the dip ible to check the oil level w ith the engin e idling, bu t be sure to r emember the foll en the engine coolant tem perature gau ge is within the green r ange. stick on its reverse side m arked with "E NGINE IDLING".