Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION ADJUST MIRROR Loosen nut (1) of the mirror and adjust the mirror to a position ADJUST JOYSTICK (PCCS LEVER) WARNING the (1) REMARK PCCS: Palm command control system 3 - 102 where it gives the bes t view from the operator's s In particular, be sure t o adjust the mirror so that p eople a t the left or right of the mac After moving case (2) in o rder to adjust the position of t he steering, directional, and gearshift lever, s ecure lock lever (1) into the notched hole, making su re it is in the LOCK position. If it is not completely locked, the steering, dir ectional, and gearshift lever may unexpectedly move and cause damage, serious in jury, or death .

The steering, direction al, and speed lever (wrist c ontrol t ype single lever: joystick) can be adjusted by 100 mm (3.9 in) in 5 stages to the fro nt or rear. Adjust to the mo st suitable p ositio n to match the adjustm ent of the operator's seat. 1. Pull up lock lever (1) to the FREE position at the rear of case (2) on left side of the operator's compartment. 1. Pull up lock lever ( 1) to the FREE position at the rea r of he operator's compartment 2. With lock lever (1) front of case (2), t hands. The joystic 3. Move case (2) to pulled up, use your other hand t o gri p hen move it forward with y k moves with case (2).

the desired position until and Then pull up lock automatically retur lever (1) and release it. ns to the LOCK position.