Komatsu — SHIFTING GEAR

. OPERATION OPERATION operation), the transmission is shifted to F1. If it is moved back (reverse travel operation), the transmission is shifted to R2. shifted to R2. 3 - 124 Shift operation when irectional, and speed lever is in the N positio once, th e mode e. After that, if the steering, directional, and s peed lever is operated forwa rd (forwa rd travel Shift operation when directional, and speed lever is in the N positio n, if the up switch is pressed twice, th e mode e. After that, if the steering, directional, and s peed lever is operated forwa rd (forwa rd travel mission is shifted to F2.

If it is moved back e transmission is REMARK Even when the transmi ssion is set to [F1-R1] mode, [F1-R2] mode, or [F2-R2] mode, if the UP switch or DOWN switch is operated, this will be given priority and manual operation c For example: After the [F1-R2] mode has been set, if the joystick is operated forw ard (to set to FORWARD), th e speed range is set to F1. However, if the lever is kept operated forward and UP sw itch (a) is pressed once, the speed range will shift to F2; if the UP switch is pressed twice, the speed ra nge will shift to F3.

When th e transmission is in F3 and DOWN switc h (b) is pressed once, the speed range will sh ift to F2; if the DOWN switch is presse d twice, the speed range will sh ift to F1. he joystick is operated to the rear (to set to REVERSE), the speed range is automatically On the other hand, if t switched R1 → R2. Ho wever, if the lever is kept operated to the rea r and UP switch (a) is press ed once, the speed range will sh ift to R3; if the DOWN switch (b) is pressed o nce, the speed range will shi ft to R1. However, the setting st ays in the [F1-R2] mode.

If the steering, direc tional, and gearshift lever is r eturned t o N a nd then operated forward ( to set to FORWARD), the speed range is set to F1; if the lever is operated to the rea r (to set to REVERSE), the spe ed range is automatically switched R1 → R2 . REMARK 1-R1]. The default setting is [F After the starting switch is turned OFF, the shift mode returns to the