. MAINTENANCE SERVICE PROCEDURE ADJUSTMENT WARNING Grease inside the adjusting mechanism is under high pressure. the body your Komatsu distributor for repairs. 4 - 29 Grease comin g from plug (4) under pre ssure can penetr causing injury one turn. Do n or death. For ot loosen any this reason, d part other tha bring your fac If track tensio e in front of th n is not reliev WHEN INCREASING TENSIO N 1. First rem ove the bolt (1) and then remove the cov NOTICE When remo ving cover (2) , be careful no t to let any dirt get There is a safety label stu ck to the bac k of cover (2). Be c 2. Pump in grease throu gh the grea se fitting (3) with a grease pump. 3.
To chec k that the cor rect tension has been achiev ed, move the machine backwards and 4. Check th e track tensi on again, an d if the tension i s not correct, 5. Continu e to pump in grease until (S) becomes 48 in). If th e tension i s still loose, the pin and b excessiv ely worn, so they must b Contact your Komats u distributor