. MAINTENANCE SERVICE PROCEDURE CLEAN AND CHECK RADIATOR FINS WARNING REMARK 4 - 35 Always stop the engine and check that it is not rotating before st arting cleaning or ins pection. When rotating t he fan, always close the radiator grill to make it i If the radiator fins are clo gged or dirty, clean and inspec t them 1. Remove four bolts (1 ) at corners of grill (2), then ope n the grill. 2. Clean the radiator fin s clogged with mud, dust a nd l eaves with compressed instead of compress REMARK Check the hydraulic cool er hoses. If any hose is cracked or hardened by a ge, r eplace with a new hose. Also check and tighten all loose hos e clamps.
When cleaning the radiat or fins, reverse the rotation of th e fan and change the direction of t he air flow. Open the engine r oom side cover, set the fan rotation selector switch to the CLN position, t hen start the engine. speed in reverse and cleans the fins. The fan rotates at 100% speed in reverse and cleans th e fins The fan rotation selecto r switch cannot be operated when the when engine is running. Use compressed air to b low off any dirt embedded in th e radiator fins. It is also possible t o blow with compressed air from the side holes on both sides (3) o