Komatsu — REPLACE HYDRAULIC TANK BREATHER ELEMENT

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING REPLACE HYDRAULIC TANK BREATHER ELEMENT WARNING (1), turn it slowly to release the internal pressure before removing it. 4 - 60 There is dan ger that oil may s purt out under internal p ressure, s o stan d to the side, and gradually turn t he plug to release in terna pressure be fore removing th 1. Place t he machine on a horizontal place . 2. Remov e oil level plug (G) and chec k the oil level. Th e oil l evel should be within a ran ge from the b ottom edge of the plug hole to 20 m m (0.8 in) dow n from the h ole. 3.

If the o il level is still to o low, add o il throug h oil filter plug hole (F) unt il the oil overflo ws. Before removing oil pl ug (F), remo ve all the mud and dirt f rom around oil filler plug (F ). Be careful n ot to let any dirt o r sand get in whe n adding oil. Replace the element when th When remo ving breather ca 1. Remov e breather cap (1) on the to p of t he hydraulic tank. 2. Replac e element (2) i nside the cap