. SAFETY PRECAUTIONS FOR MAINTENANCE immediately after it has stopped, injector terminal and inside the 2 - 33 PRECAUTION WITH HIGH-PRES SURE OIL s under internal pressure. When inspecting or replacing piping or hoses, always The hydraulic system is alway replacing always check that the pressure in the h ydraulic circuit has been released. If the cir cuit is still und er pressure, it will lead to serious personal injury, so alwa ys do as follows. r replacement work when the hydraulic system is under pressure.
Do not carry out inspection o r replacement work when the hydraulic system is under p If there is any leakage from th e piping or hoses, the surrounding area will be wet, so che ck for cracks in the piping and hoses and for swelling in When carry out inspection, w the hoses. ear safety glasses and leather gloves. essure oil leaking from small holes cause blindness if it contacts your a jet of high-pressureoil and suffer sh the place with clean water, and for medical attention. ear safety glasses and leather gloves. There is a hazard that high-pr may penetrate your skin or eyes directly.
If you are hit by injury to your skin or eyes, wa consult a doctor immediately PRECAUTION FOR HIGH FUEL PRESSURE High pressure is generated insi de the engine fuel piping when the engine is running. Wh en carrying out inspection or maintenance of the fuel pipin g system, wait for at least 30 seconds afte r stopping the engine to let t he i nternal pressure go down before starti ng inspection or maintenance. HANDLING HIGH-PRESSURE H OSES If oil or fuel leaks from high-p ressure hoses, it may cause fire or defectiv e operation, w hich may lead to s erious injury. If any loose bolts are f stop operations immediately ound, stop work and tighten to the specified t orque.
If any d amaged hoses are found, and contact your Komatsu distributor Replace the hose if any of the f Damaged or leaking hydraul Frayed or cut covering or ex Covering swollen in places. Twisted or crushed movable Foreign material embedded PRECAUTION FOR HIGH VOLTA When the engine is running or high voltage is generated at th engine controller, so there is da the injector terminal or the insid If it is necessary to touch the in engine controller, please conta