. OPERATION EXPLANATION OF COMPONENTS temperature enters green range (B). (A): White range (B): Green range (C): Red range 3 - 16 HYDRAULIC OIL TEM Gauge (3) indicates the hydraulic oil temperature If the temperature is normal during operation, gre en rang e (B ) will light. If red range (C) lights up during operation,move th e fuel c ontro l dial down to approx. 3/4 o f the full speed, reduce the l oad, an d run until the oil temperature e nters green range (B). If the oil temperatures does not enter gree stop the work equi n range (B) even when the pment control lever and r load is un unt reduced, il the oil FUEL LEVEL GAUGE n the fuel tank. tion, the green range (B) should be lit.
Gauge (4) fuel level i During normal opera tion, the green range (B) sho uld be If red range (A) lights up during operation, add fu el immediately. If this is not done, the engine speed will become irr gular o r an error display will be shown on the monitor. (A): Red range (B): Green range REMARK The display is not proportional to the amount o f fuel re maining. If only the red ran ge (A) lights up, there is less than 270 liters fuel remaining. iters (71.34 US gal) of ENGINE PRE-HEATIN G PILOT LAMP Lamp (5) indicates th at engine is being pre-heated by the electrical heater during cold w eather.
ler detects the coolant temperature and es pre-heating in low temperatures when The engine control automatically actuat starting the engine.