. OPERATION EXPLANATION OF COMPONENTS JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIFT LEVER) (PCSS lever) Lever (2) is used to switch direction of travel and to steer the machine. Forward-reverse shifting Position (a): FORWARD left or right to turn the machine. The and gearshift lever is at the and switch (c) or switch (d) is is pressed, the transmission the switch is pressed, the speed in each speed range, see 3 - 42 REMARK PCCS: Palm command control Position Position Move t reverse Position Position With th artia machin e will turn gradually in th e same direction as the lever is operated.
If t he le ver is moved fully to the left or right, the machine will t urn in a small REMARK If the lever is released when steering the machine, the leve r will return to the (a) position or th e (b) positio n and the machine will be returned to straight movement. Gear shifting the steering, directiona When FORWARD or REVERSE posit pushed , the transmission speed UP switch (c): Each time the sw will shift up one s DOWN switch (d): Each time transmission For details of the maximum s Fo "SPECIFICATIONS (PAGE 5-2 REMARK Whe n the transmission is shi fted, the speed range being u sed i s displayed on th e display pa nel on the m onitor pane Neutral: N is displayed on th FORWARD 2nd:
F2 is displa REVERSE 3rd: R3 is display Whe n the parking lever is loc For details of the gearshift o peration using the shift mode, see "SHIFTING GEA R (PAGE 3- 122)". Shift mode selection means the operatio n to set the selected speed ra nge beforehand in th e N position.