3. CENTER PIVOT PIN 3. CENTER PIVOT PIN 1) 1) CONSTRUCTION CONSTRUCTION Figure shows the construction of the center pivot pin assembly. This assembly serves to connect the front frame with the rear frame; two sets of assemblies are provided, one each for the upper and lower parts. The numbers in parentheses following the parts name denote the item numbers shown in the figure in the disassembly and assembly procedures.
25 26 6 10 7 19,20 28 2 17 4,5 4,5 1 1 29 29 3 18 16 13 9 22 30 30 11 23,24 6 21 UPPER LOWER UPPER 75795SE13 1 Bearing 2 Cover 3 Cover 4 Shim (0.1 t) 5 Shim (0.5 t) 6 Bolt-w/washer 7 Pin 8 Collar 9 Collar 10 Plate 11 Pin 12 Dust seal 13 Dust seal 14 Shim (0.1 t) 15 Shim (0.5 t) 16 Bushing 17 Cover 18 Cover 19 Hexagon bolt 20 Hardened washer 21 Plate 22 Plate 23 Hexagon bolt 24 Hardened washer 25 Hexagon bolt 26 Hardened washer 27 Shim (2.0 t) 28 Bushing 29 Front frame 30 Rear frame 5-53 8 12 19,2 14,15,