Service Manual for WD10 Diesel Engine 49 Lubricating System 491 Disassembly and Assembly of Lubricating System 4911 Exploded View of Lubricating System Hexagon plug Hollow bolt Crankshaft pulley and Engine oil pump intermediate gear module damper Oil strainer Hexagon bolt Engine oil cooler Main oil gallery pressure limiting valve Engine oil pump Engine oil cooler cap Engine oil filter Fig. 4-65 Exploded view of lubricating system 4912 Steps to Disassemble Lubricating System (1) Remove oil sump, refer to disassembly of oil sump for details. (2) Remove oil strainer.
(3) Remove crankshaft pulley, damper and the hexagonal head plug from gear housing, refer to disassembly of crank-rod mechanism for details. (4) Remove engine oil pump intermediate gear module. (5) Remove engine oil pump. (6) Remove main oil gallery pressure limiting valve. (7) Remove engine oil filter. (8) Remove the hollow bolt (for compressor water supply) on engine oil cooler cap and the hexagon bolts that used to fix the oil dipstick module. (9) Remove engine oil cooler. 105 Engine oil sump Engine oil cooler bypass valve