Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine (2) Clean up engine oil cooler bypass valve and valve fitting hole on engine block. (3) Install safety valve, safety valve spring and compound gasket orderly. (4) Install the hexagon plug and tighten it. 499 Disassembly, Inspection, Maintenance and Assembly of Engine Oil Strainer 4991 Exploded View of Engine Oil Strainer Gasket Engine oil stainer Fig. 4-73 Exploded view of engine oil strainer 4992 Steps to Disassemble Engine Oil Strainer Screw off the two hexagon bolts, take down the oil strainer and gasket, as shown in Fig. 4-73. 4993 Inspection and Maintenance of Engine Oil Strainer Check the strainer and gasket for crack damage, replace if necessary.

4994 Steps to Assemble Engine Oil Strainer (1) Check the strainer and gasket before assembling, make sure there is no manufacturing defect and damage. (2) Clean up fitting surface between oil strainer and engine oil pump, clean up the strainer inner cavity. (3) Install the strainer and gasket. (4) Install and tighten the hexagon bolts. 113 Hexagon bolt Flat washer