Service Manual for WD10 Diesel Engine 41113 Steps to Assemble Engine Accessory System Assembly of generator module (1) Place the generator on generator support, loose-fit it on the support and draw-in rod with fixing bolts. (2) Install generator poly V-belt. (3) Adjust the location of generator and tension the poly V-belt with the draw-in rod, tighten generator fixing bolts and nuts, as shown in Fig. 4-80. Fig. 4-80 Assembly of generator module Assembly of A/C compressor module (1) Place the compressor on compressor support, loose-fit it on the support and draw-in rod with fixing bolts. 119