Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine Troubleshooting: 1) Check relief valve module when unloading intake, clean the jammed valve or replace valid parts. Check unloading valve module when unloading exhaust, clean the jammed/blocked valve or replace valid parts. 2) Check brake system, replace unserviceable parts. 3) Poor lubrication between piston and cylinder sleeve, undersized clearance or scuffing will result in overheat, check and repair or replace unserviceable parts. 41144 Steps to Assemble Air Compressor (1) Place the O-shape seal ring in compressor ring groove.

Make sure compressor main axis is perpendicular to engine timing gear housing fitting surface, and push the compressor into the mounting hole gently, ensure the helical gears are normally engaged and air compressor flange face should be parallel with engine fitting surface, loose-fit the compressor with three M10 hexagon toothed bolts, and tighten the bolts with 13mm open end wrench (or double offset ring spanner) to 44~58Nm. Hexagon flange bearing surface toothed bolt Air compressor O-shape seal ring Fig. 4-89 Assembly of air compressor (2) Install air compressor water inlet pipe, water outlet pipe, oil inlet pipe and intake pipe, fix the pipes with clamps. 144