Service Manual for WD10 Diesel Engine We can get that required antifreeze additive for -20 o C is 13.5L Difference value between -30 o C and -20 o C is 4L For the difference value 4L, another 50% of that is required and necessary, because of before adding antifreeze additive, a part of coolant must be drained out, and antifreeze additive in this part of coolant will be drained out too. So required antifreeze additive is: 4L+50%*4L=6L.
215 Auxiliary Materials Table 2-2 Auxiliary materials Table 2-3 Reference table for sealant application of diesel engine 11 S/N Designation Color Purpose and application 1 Molykotte Pulver (Fine molybdenum powder) Black Apply on smooth metallic surface to prevent occlusion. For example: Cylinder sleeve external surface. 2 Molykotte G.u.plus (Molybdenum disulfide oiling agent) Dark gray Play lubrication action before lubricating oil pressure is built-up. For example: Apply on intake valve rod.
Brand Main application Application position list Additional remarks Loctite 242 Apply on thread for fixation and to prevent loose, medium strength Flywheel housing bolt Camshaft thrust plate bolt Camshaft timing gear bolt Middle idle gear bolt Engine front cover bolt Engine oil filter seat bolt, engine oil cooler bolt Plug screw of engine oil cooler regulating valve Bolt of fuel pump oil return pipe fixing device Air compressor shaft end thread Oil strainer bolt Bolt of sensor and wiring harness fixing device It is optional to pre-coat DriLoc204.
Loctite 262 Apply on thread to lock, seal and prevent loose Cylinder cover auxiliary bolt Loctite 271 Anti-loosing and fastening Bowl type plug used to block oil hole