Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine ATTENTION: 1. Diesel engine fault cause determination is an extremely careful job. Before basically be sure about the cause, it’s not allowed to disassemble the engine casually, otherwise instead of eliminating the fault, some severe trouble may occur due to improper reassembling. 2. For key components, such as high pressure oil pump and turbocharger, only dedicated instruments and equipment are not enough to perform proper maintenance and inspection, an experienced serviceman is indispensable. So users without proper experience and tools are not allowed to disassemble and adjust the engine casually.

32 Fault Causes and Elimination Methods 321 Diesel Engine Couldn’t Be Started 22 Fault cause Elimination method 1. Blockage of fuel pump oil inlet filter screen or hoses in the circuit Check and clean up the dirt, and check the cleanliness of the fuel. 2. Air in fuel system Expel the air and check airtightness of joints, repair if necessary. 3. Fuel injection pump failure Check the plunger and fuel delivery valve, repair or replace the damaged parts. 4. Fuel injector failure Check the atomization condition of the injector. 5. Valve or fuel supply pipe is damaged or leaking oil Check and adjust. 6. High pressure fuel pipe is damaged or leaking oil Check and adjust. 7.

Insufficient cylinder compression pressure Check the valve and cylinder gasket for sealing performance, check whether the piston is worn, repair or replace. 8. Low temperature Use start aid.