Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine 433 Disassembly, Inspection, Maintenance and Assembly of Engine Front Cover 4331 Exploded View of Engine Front Cover Seal ring Fig. 4-22 Exploded view of engine front cover 4332 Steps to Disassemble Engine Front Cover (1) Remove engine front cover fastening bolts (key point 1); (2) Remove engine front cover (key point 2); (3) Remove engine front cover seal ring (key point 3); 4333 Inspection and Maintenance of Engine Front Cover Key point 1: The removed engine front cover should be placed in clean environment, check and ensure inner side of engine front cover is clean before assembling. Key point 2:

Apply sealant on the fitting surface of engine front cover, make sure the sealant is evenly distributed and no discontinuity. Key point 3: Check whether seal ring is damaged, replace it if so. When assembling, seal ring should be fully pressed into engine front cover seal groove. 56 Engine front cover Hexagon flange toothed bolt