Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine 4362 Steps to Disassemble Oil Sump (1) Turn over the engine to keep oil sump upward (key point 1); (2) Remove oil sump fastening bolts (key point 2); (3) Remove oil sump support blocks; (4) Take down oil sump and the seal ring; (5) Remove the compound gasket and magnetic screw plug assembly. 4363 Inspection and Maintenance of Oil Sump Key point 1: Disassembling: Before the disassembling, all engine oil should be drained out. Put an engine oil container under drain screw plug of oil sump, screw off the plug with a plug wrench to drain oil out. Key point 2: Assembling: Tighten oil sump fastening bolts according to the order illustrated in the chart below.

Fig. 4-28 4364 Steps to Assemble Oil Sump Assembling steps are contrary to disassembling ones. 61 Tightening torque 22~29Nm