Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine 443 Disassembly, Inspection, Maintenance and Assembly of Crankshaft 4431 Exploded View of Crankshaft Main bearing bolt Crankcase Crankshaft Flywheel ring gear Main bearing shell Flywheel Crankshaft timing Bearing gear Baffle ring Flywheel bolt Flange Pulley bolt Engine block Fig. 4-36 Exploded view of crankshaft 4432 Steps to Disassemble Crankshaft (1) Put the engine crankcase upward, and then remove main bearing bolts and place them orderly; (2) Take down crankshaft and flywheel, remove front and rear thrust plates and flywheel bearing.

Remove oil seals; place the crankshaft on bracket (for long time storage, the crankshaft should be placed vertical); (3) Classify the removed parts according to the requirements. 4433 Inspection and Maintenance of Crankshaft (1) Check whether there is crack on fillet area of crankshaft main journal and neck of crankshaft; Check the joint part of crankshaft and main bearing for crack, check and dredge the oil gallery. (2) Check the wear condition of crankshaft main journal and neck of crankshaft, and check whether there is line-like puckering, metal peeling and crack. (3) Check the wear condition of front and rear oil seals.

(4) Check whether there is failure like thread damage on main bearing bolts (5) Check crankshaft flange bolt holes for crack. 70 Damper Pulley