Weichai — Weichai WD10 Diesel Engine Service Manual

Service Manual for WD10 Diesel Engine (11) Firstly pre-tighten each bolt with low-torque pneumatic impact wrench, and then tighten each bolt to 80Nm orderly, thirdly the torque should reach 250~280Nm. Assembly of crank shaft is finished. 444 Disassembly, Inspection, Maintenance and Assembly of Flywheel and Ring Gear 4441 Exploded View of Flywheel and Ring Gear Flywheel Flywheel ring gear Hexagon bolt Bearing Crankshaft Flywheel bolt Baffle ring Stud Locating pin Fig. 4-38 Exploded view of flywheel and ring gear 4442 Steps to Disassemble Flywheel and Ring Gear Disassembling steps are contrary to assembling ones.

4443 Inspection and Maintenance of Flywheel and Ring Gear (1) Check whether there is failure like thread damage on flywheel bolts. (2) Check flywheel surface for conquassation. (3) Check whether flywheel ring gear is damaged. 72