AUXILIARY CONTROL HANDLE 5.12 The auxiliary handle control contains 2 push buttons and 1 rocker switch. On the left hand control handle, Button A is a spare button, Button B controls the horn and Switch C controls forward and reverse operation of an attachment. On the right hand control handle, Button A operates the left turn signal and Button B operates the right turn signal. (See fig. 2945) Button A To replace a defective switch : 1 Make sure the ignition key switch is in the “OFF” position. 2 Remove the four screws from the side of the handle (fig. C2945). 3 Pull the handle apart, separating from the middle (fig. C2946).
4 Unplug the 3 wires that are connected to the rocker switch (black, red and blue - fig. 2947). 5 Remove the switch from the mounting plate by press- ing on the outer ends and pushing the switch through the opening. 6 Replace with the new switch, reconnect the wires, and replace the outer shell. Button B Switch C C2945 5 C2946 Black Red Blue C2947 5-23