. OPERATION OPERATION 2. To warm up the hydraulic oil (only in cold weather), do as follows. During the warming-up operation, check that the engine equipment lock lever to control lever into maximum of 10 reach the relief the water If 3 - 93 NORMAL OPERATIO N After the engine starts, d o not start operating the machine imm ediately. First, carry out the follo wing operations and checks. NOTICE the engine before the warming-up operation is completed. w idle or high idle continuously for more than 20 minutes.
Do n ot suddenly accelerate the engine before the war ming-up opera tion is Do n ot run the engine at lo w idle or high idle continuo usly for more than 20 If it i s necessary to run the engine at idle, apply a load from time to t ime or run the engine at a mid-range Depress accelerator load at midrange sp pedal (1) lightly and run t eed for about 5 minutes. the FREE position, and out of the TILT Keep the relief time seconds. In this w ay, the hydraulic oil will pressure and will be warmed up more quickl 3. After completing th e warming-up operation , check tha roperly.
ntil engine w r oil temper he green ra instruments, gauges , and pilot lamps work p If any problem is fou nd, carry out repairs. ation under light load u (2) and torque converte lti monitor screen enter t Carry out the oper temperature gauge gauge (3) on the mu 4. Check for abnormal any problem is foun exhaust gas color, nois d, contact your Komatsu e, or vibrati distributor.