Komatsu — OPERATION OF WORK EQUIPMENT

. OPERATION OPERATION TURNING WARNING 3 - 107 Operatin g the steering whee l suddenly at high speed or operating t he steering wheel on steep slopes is dangerous. Do not the steering wheel i n such situations. If the en gine stops when the machine is traveling, the e mergency stee ring i s actuated. Note that this syste m is only for steering encies, so never sto p the engine. icularly dangerous i f the engine s tops when the machine is traveling on slopes, so never let th e engine stop when on slopes. gine stops, stop the machine immediately at When trav eling, angle joysti ck steering l ever (1) in the direction turning, a nd the machine wi ll turn.

With this machine, the front and rear frames articu late around t connectin g pin (center pin) connecting t he front a nd rear frame The rear w heels follow the s ame path as the front w heels when t machine t urns. erating the joystick steering lever, angle the joysti When op steering le ver lightly to follo w the turning angle of t he machine. NOTICE ng fully, stop operating the steering lever when it reaches the end of its stroke. Do not operate beyond this point. When turni ng fully, stop operat ing the steerin g lever wh en it reaches th e end of its stroke. Do not operate Check also that the actuation of the steering i s normal.

I f any abnormal ity is found, please ask your Komats u distributor to carry out inspect ion. OPERATION OF WORK EQUIPMENT Lift arm c to operate ontrol lever (1) and the lift arm and b bucket control lever ( ucket as follows. 2) can be us