Komatsu — CHECK BATTERY ELECTROLYTE LEVEL

. MAINTENANCE SERVICE PROCEDURE CHECK BATTERY ELECTROLYTE LEVEL Carry out this procedure before operating the machine. WARNING NOTICE 2. If the electrolyte level is below the mid point of U.L and L.L marks, remove the cap immediatelyand add the distilled water. 3. After adding distilled water, tighten cap (1) securely. 4. After adding, securely tighten the cap. REMARK If distilled water is added to above the U.L. line, use a syringe to lower the level to the U.L. line. Neutralize the removed fluid with baking soda (sodium bicarbonate), then flush it away with a large amount of water or consult your Komatsu distributor or battery maker.

4 - 46 EVERY 250 HOURS SER Maintenance for every 50 and 100 hours service should be carried out at the same time Do not use the battery if the batt ery electrolyte level is below the LOWE R LEVEL line. This will a ccelerate deterioration of t inside of the battery and reduce the service life of the battery. In additio n, it may cause an expl osion. ks near the battery. The battery generates flammabl e gas and there is danger of explosion, do not bring fire or spar ks near the battery. Battery electrolyte is dangerous . If it gets in your eyes or on your skin, wash it off with a large a mount of water a nd consult doctor.

When adding distilled water to the battery, do not allow the battery electrolyte to go above the UPPER LEVEL line. If t ay leak and cause damage to the paint surface or corrode other parts. electrolyte level is too high, it m ay leak and cause damage to the paint surface or corrode other If there is a fear that the battery wate r may freeze after refilling with purified w ater (e.g. commercially available replenishment wat for a battery), do the replenishmen t before the day's work on the next day. Inspect the battery electrolyte l evel at least once a month and follo w the basic safety pr ocedures given below. WHEN CHECKING ELECTROLYTE LEVEL FROM SIDE OF BATTERY ttery, check as follows.

If it is possible to check the ele ctrolyte level from the side of the ba ttery, check as follow 1. Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L.) and LOWER LEVEL (L.L.) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion.