. MAINTENANCE SERVICE PROCEDURE (4) from the hydraulic tank. 4 - 71 CLEAN HYDRAULIC TANK STRAINE When changing t he oil in t he hydra ulic tan k, drain t he oil from the tank and clean the str 1. Loosen the m ounting bolts, the n remo ve cover Loosen bolts (2), then remove 3. Loosen nut (5 ), then re move st rainer ( 4). 4. Remove any dirt from strainer ( 4), then wash in clean diese l oil or flushing oil . is broken, replace it with a new part. r (4) to holder (3), then tighten nut (5). rque: 59 to 74 Nm (6.0 to 7.5 kgm, 43.4 to 54.2 lbft) (3). ng (6) of the holder with a new part. If strainer (4) is broken , replac e it with a new p 5.
Install straine r (4) to h older (3), then tig hten nu Tightening to Tightening to rque: 59 6. Install holder Replace O-ri ng (6) of t he holde r with a new pa