. OPERATION EXPLANATION OF COMPONENTS measurement was made. CAUTION Note that the cancel switch can only be used to cancel the measured data when the payload is being displayed (for 15 sec.) on payload display portion (A) on the multi monitor load meter display screen. 3 - 31 LOAD METER CANCEL SWIT Whe n the data measured b use this s witch (5) to cancel and return to the display in use before the TRAVEL SPEED LIMIT ON-O FF SWITCH to the travel speed limit mode. o the travel speed limit mode and the is set according to the setting of the ravel speed limit mode is shut off. In Use this switch (6) to switch to the travel speed limi t mode. ON:
Electric power is sent t o the travel speed limit mode a nd the maximum travel speed setting the travel speed limit dial. Electric power to the t OFF: hut off. In this condition, even if maximum travel speed the setting of the dial is changed, the cannot be set. changed, the REMARK The s etting of the travel spee d limit ON-OFF switch i s displayed by the in dicator lamp under the travel speed limit dial. h is ON. If the lamp is lighted up, the travel speed limit switc h is ON