www.changlin.com.cn High Pressure Fuel Lines‐Replacement Preparatory Steps: Torque Value: (Line Fittings)30 N •m [22 ft-lb] (Support Clamp)6 N • m [4 ft-lb] (Support Bracket)24 N • m [18 ft-lb] 101 / 167 pages • Clean all debris from around the fittings. 17 mm NOTE: If individual lines are to be replaced, remove the support clamp from the let of lines containing the line to be replaced. Clean all debris from around the fittings. 17 mm 17 mm D I d t C p f n a N t f f i I isconnect the line (s) from the fuel pump. nstall protective covers to the injectors and elivery valves to prevent the entry of dirt into he system. aution:
Install the support clamp in original osition and, to prevent damage from high requency vibration, make sure the lines have ot been bent or do not contact each other or nother component. OTE: To prevent damage to the fuel lines, hey must be connected to the injectors and uel injection pump in a free state without orcing the connecting nuts. The fuel lines are correctly sized for each application and bending the lines s not acceptable. nstall the lines in the reverse order of removal.