www.changlin.com.cn 10 mm The special washer on the Bosch injection pump must be removed so the lockscrew can be tightened against the drive shaft. Torque Value: 30 N*m [22 ft-lb] 22 mm Remove the gear cover access cap. Remove the nut and washer from the fuel pump shaft. 75 mm T-Bar Puller Pull the fuel pump drive gear loose from the shaft. Caution: Do not remove the control lever. The lever is indexed to shaft during pump calibration. Removal of the lever will alter the fuel pump calibration and effect engine performance. 113 / 167 pages