Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn 10 mm NOTE: The holes shown in the illustration are drilled through. Apply liquid teflon sealant to the capscrews. Install the aftercooler housing and a new gasket. Torque Value: 24 N*m [18 ft-lb] 8 mm Install the coolant supply tube (1) and coolant return tube (2). Install the air crossover tube (3). Reinstall and bleed the high pressure fuel lines. Torque Value: 8 N*m [6 ft-lb] Caution: The system must be filled slowly to prevent air locks. Be sure to open the engine and aftercooler vents to allow air to escape as the system is filled. Fill the coolant system with a mixture of 50% water and 50% ethylene-glycol type antifreeze. Charge Air Cooler‐Leak Check NOTE:

The long term integrity of the charge air cooler system is the responsibility of the vehicle and component manufacturers: however, the following symptoms can be checked by any Cummins Authorized Repair Location: 138 / 167 pages