Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn Apply 276 kPa [40 psi] of air pressure to the cooler. If the pressure drop is 35 kPa [5 psi] or less in 15 seconds, the cooler is okay. If the pressure drop is greater than 35 kPa [5 psi] in 15 seconds, the charge air cooler must be repaired or replaced. Refer to the CAC manufacturer for repair instructions. NOTE: A leak tank can be used to locate the air leak. Turbocharger‐Replacement Preparatory Steps: Remove the air crossover tube. Disconnect the intake and exhaust piping. 10 mm Remove the capscrews from the oil drain tuble. 16mm Remove the oil supply line. 140 / 167 pages