www.changlin.com.cn 15 mm Install the exhaust manifold and new gaskets. Torque Value: 43 N*m [32 ft-lb] Follow the tightening sequence shown in the illustration Then, follow the same sequence and tighten the capscrews again to the same torque values. Install the parts previously removed. Operate the engine and check for leaks. Lubricating System Repair Lubricating System Repair Summary Oil Pressure Regulator, Valve and Spring Replacement. Preparatory Steps: Clean debris.
146 / 167 pages Component To Be Replaced Tools Preparatory Steps Oil Pressure Regulator Valve and/or Spring Ratchet, 22 mm Socket and Torque Wrench Clean debris Oil Cooler Element and/ or Gaskets 16 mm Wrench, Ratchet, 10 mm Socket and Torque Wrench Drain Coolant, Remove the oil filter.