Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn 10 mm Assemble the oil cooler gasket, element, cooler cover gasket and cooler cover to the cylinder block. NOTE: Be sure to remove the shipping plugs (A) from the new cooler element. Torque Value: 24 N*m [18ft-lb] 16 mm Connect the turbocharger oil supply line. Torque Value: 15 N*m [11 ft-lb] Install a new oil filter. Follow the manufacturer's instructions for tightening. Caution: The system must be filled slowly to prevent air locks. Be sure to open the aftercooler vents to allow air to escape as the system is filled. Fill the coolant system and operate the engine to check for leaks. Stop the engine and check the coolant and oil level. 149 / 167 pages