www.changlin.com.cn Mark the pulley and rotate the crankshaft 360 degrees. Caution: To prevent engine or pin damage, be sure timing is disengaged. 14 mm, Flat blade Screwdriver Adjust the valves as indicated in the illustration. Tighten the lock nut and measure the valve lash again. Torque Value: 24 N*m [18 ft-lb] Six‐Cylinder Engine Adjustment 14 mm, Flat blade Screwdriver Locate Top Dead Center (TDC) for Cylinder Number 1. Check / adjust the valves as indicated in the illustration (I = Intake; E = Exhaust). Mark the pulley / vibration damper and rotate the crankshaft 360 degrees. Caution: To prevent engine or pin damage, be sure timing pin is disengaged. 54 / 167 pages