www.changlin.com.cn Hydraulic Cold Start Injection Advance (Rotary Automotive Pumps Only) A hydraulic cold start injection advance (KSB) device is used on 1988 and later certified engines for white smoke control during cold starting. When the engine is cold, the KSB cauese the injection timing mechanism to be fully advanced at low speeds. When the engine reaches normal operating temperature, the KSB is deactivated and injection timing is then advanced proportionally to increased engine speed. Deactivation of the KSB is controlled by a temperature sensor switch located in the engine air intake manifold.
A wiring Deactivation of the KSB is controlled by a temperature sensor switch located in the engine air intake manifold. A wiring harness connects the KSB and temperature switch. If the wiring is disconnected, the KSB remains activated and the injection timing is fully advanced. 66 / 167 pages