Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn 13 mm Install the belt tensioner. Torque Value: 43 N*m [32 ft-lb] Fan Pulley‐Replacement Preparatory Steps: Remove the drive blet. NOTE: Loosen the capscrews before removing the belt and torque the capscrews after the belt is installed. 10 mm and 13 mm Remove the four capscrews, fan and spacer. Replace the fan pulley. Torque Values: 8 mm Capscrews-24 N • m [18 ft-lb] 10 mm Capscrews-43 N • m [32 ft-lb] Water Pump‐Replacement Preparatory Steps: Drain the coolant. Remove the drive belt. 92 / 167 pages