www.changlin.com.cn Lift the tensioner arm and pulley to install the drive belt. Caution: The system must be filled slowly to prevant air locks. During filling, air must be vented from the engine coolant passages. Be sure to open the petcock on the aftercooler for aftercooled engines. The system has a maximum fill rate of 14 liters per minute [3.5 U.S. gallons per minute]. Do not exceed this fill rate. Wait 2 to 3 minutes to allow air to be vented. Then add coolant to bring the level to the top. 94 / 167 pages C 5 p lose the drain valves. Fill the cooling system with a mixture of 0% water and 50% ethylene-glycol type antifreeze.
This will rovide freeze protection to -37°C [-34°F], Coolant Capacity Liters (Engine Only) [U.S. Quarts] 4B3.9 6B5.9 4BT3.9 4BTA3.9* 6BT5.9 6BTA5.9* 7.0 [7.4] 7.9 [8.4] 9 [9.5] 9.9 [10.5]