Toyota — Service Manual Change History

19-185 Electrical System Troubleshooting Section 19 Corrective action If forward tilt can be performed, replace the C/V tilt control valve. If backward tilt can be performed, replace the C/V tilt control valve. If lowering can be performed, replace the C/V lift lower lock valve. If raising can be performed, replace the C/V unload valve. Harness check or replace switch Replace Checking method Turn the tilt solenoid OFF and operate to forward tilt using an active test. Turn the backward tilt lock solenoid OFF and operate to backward tilt using an active test. Using an active test, turn the lift lower lock solenoid OFF and perform lower operation. For cowl lever vehicles:

Turn the unload valve solenoid ON and perform lift raising operation using an active test. For mini lever vehicles: Turn the unload valve solenoid OFF and perform lift raising operation using an active test. ON/OFF check with analyzer – Malfunction area · mode C/V tilt control valve: Stuck (internal damage) C/V backward tilt lock valve: Stuck (internal damage) C/V lift lower lock valve: Stuck (internal damage) C/V unload valve: Stuck (internal damage) Seat switch unit: Short fault (internal damage) Seat switch line (Signal, ground): Disconnection fault (Harness, connector) SAS/OPS controller, OPS controller: Controller defect Phenomenon on vehicle Material handling OPS does not operate.

Control type OPS