Toyota — SIB CE10-005 Main Wiring Harness Change (Error Code 73-1)

SERVICE INFORMATION BULLETIN Subject: A5, A5-1, or 1-1 Error Codes for OPSS Page 1 of 1 MODEL APPLICATION:

7FBCU15, 7FBCU18, 7FBCU20, 7FBCU25, 7FBCU30, 7FBCU32 7FBCU35, 7FBCU45, 7FBCU55, 7FBCHU18, 7FBCHU25 7FBEU15, 7FBEU18, 7FBEU20, 7FBEHU18, 7FGU15, 7FGU18 7FGU20, 7FGU25, 7FGU30, 7FGU32, 7FDU15, 7FDU18, 7FDU20 7FDU25, 7FDU30, 7FDU32, 8FGU15, 8FGU18, 8FGU20, 8FGU25 8FGU30, 8FGU32, 8FDU15, 8FDU18, 8FDU20, 8FDU25, 8FDU30 8FDU32, 7FGCU15, 7FGCU18, 7FGCU20, 7FGCSU20, 7FGCU25 7FGCU30, 7FGCU32, 8FGCU18, 8FGCU20, 8FGCSU20, 8FGCU25 8FGCU30, 8FGCU32, 7FGU35, 7FDU35, 7FGKU40, 7FDKU40 7FGU45, 7FDU45, 7FGAU50, 7FDAU50, 7FGU60, 7FDU60, 7FGU70 7FDU70, 7FGU80, 7FDU80, 7FGCU35, 7FGCU45, 7FGCU55 7FGCU60, 7FGCU70 GENERAL INFORMATION: All three error codes are for the same condition.

A5 is for sit-down electric trucks (Class I) A5-1 is for 8-Series internal combustion trucks (Class IV & V) 1-1 is for 7-Series internal combustion trucks (Class IV & V) with OPSS (Operator Presence Sensing System) This system was implemented in 2005. The OPSS is required to check for a malfunctioning or bypassed seat switch circuit. To do this, the system stays active even when the key is off and monitors the seat switch. If the seat switch stays closed for more than 15 minutes with the key off, the system assumes that the switch has malfunctioned or been bypassed. The code will stay active until the system sees the seat switch circuit cycle open/closed, then will automatically clear.

REPAIR INFORMATION: The most common cause for these seat switch codes is an operator staying in the seat. If an operator stays sitting in the seat with the truck turned off for 15 minutes, they will trip the seat code. Examples have been operators taking a break, lunch period, or filling out paperwork while sitting on the truck with the key off. The dealer has been called for a seat switch code and when the technician arrives, the code has cleared, but is stored in memory. This is because the operator left the truck while waiting for the technician; this cycled the seat switch and cleared the code. In many cases, the seat switch has been replaced unnecessarily due to this occurrence.

Further information concerning these codes can be found in the following manuals: 7FBCU15-55 ►OPSS Manual CU335 page 3-9 7FBEU15-20 ►OPSS Manual CU341 page 1-10 7FGCU15, 18, S20 ►OPSS Manual CU042 page 1-19 7FGU15-32, 7FDU15-32, 7FGCU20-32 ►OPSS Manual CU040 page 1-18 7FGU35-80, 7FDU35-80, 7FGCU35-70 ►OPSS Manual CU041 page 1-17 8FGCU15, 18, S20 ►Service manual 00700-X8880-71 page 19.1-82 8FGU15-32, 8FDU15-32, 8FGCU20-32 ►Service manual 00700-X8880-71 page 19-111 Chassis Electrical CE09-004 October 30, 2009 A5, A5-1, or 1-1 Error Codes for OPSS