Toyota — Service Manual Change History

19-42 19-42 Electrical System Troubleshooting Inspection 1: Carry out an individual inspection of the air-fuel ratio motor. (1) Air-fuel ratio motor resistance inspection Ignition key switch OFF, disconnect G13, connect G28 3 2 1 6 5 4 Standard: (Air-fuel ratio motor side) G13 (2) Valve operation check Connect the battery positive terminal to G13-2 and G13-5 and ground in the following terminal order. Standard: (Air-fuel ratio motor side) G13-3 G13-6 G13-1 G13-4: Moves to the close side G13-4 G13-1 G13-6 G13-3: Moves to the open side Inspection 2: Inspect for continuity and short circuiting of the harness. Ignition key switch OFF, disconnect G28, G13 and R/B main relay Standard:

Section 19 G13-2 ~ G13-1 20 ± 5 Ω (-10 ~ 50°C) 25 ± 5 Ω (50 ~ 100°C) G13-2 ~ G13-3 G13-5 ~ G13-4 G13-5 ~ G13-6 G28-21 ~ G13-3 Continuity G28-31 ~ G13-6 Continuity G28-20 ~ G13-1 Continuity G28-30 ~ G13-4 Continuity G13-2 ~ R/B main relay terminal 3 Continuity G13-5 ~ R/B main relay terminal 3 Continuity G28-21 ~ Frame No continuity G28-31 ~ Frame No continuity G28-20 ~ Frame No continuity G28-30 ~ Frame No continuity