19-45 Electrical System Troubleshooting Error code 09-1 OK OK OK OK Igniter defect Engine controller defect NG Inspection 3: Ignition coil individual inspection Ignition coil defect OK NG Inspection 4: Harness continuity and short circuit inspection Harness defect OK Inspection 5: Igniter IGT signal inspection Engine controller defect NG OK Igniter defect Inspection 1: Carry out an ignition signal (IGF) inspection. Ignition key switch OFF, disconnect G25, connect G27, ignition key switch ON, engine stopped G25 Standard:
Section 19 Disconnect the battery negative terminal (for more than 10 seconds), after inspecting and correcting disconnection of G21 and G25 and internal leakage, reconnect all connectors and the battery negative terminal, turn the ignition key switch ON to start the engine. Engine will not start Engine starts Operate the accelerator pedal and check whether there is an error. Error Inspection 1: Ignition abnormality signal (IGF) inspection 5 4 3 2 1 G25-1 ~ Frame 4.0 ~ 5.5 V