19-51 Electrical System Troubleshooting Inspection 1: Carry out ASC relay individual inspection. Ignition key switch OFF, remove ASC relay Standard: (Relay side) ASC relay Inspection 2: Inspect for continuity and short circuiting of the harness. Ignition key switch OFF, disconnect G38, remove ASC relay Standard: Section 19 At all times 1 ~ 2 terminals Continuity (approx.
90 Ω) 3 ~ 5 terminals No continuity When battery voltage is applied between terminals 1 ~ 2 3 ~ 5 terminals Continuity G38-2 ~ ASC relay terminal 5 Continuity ASC relay terminal 3 ~ IGN Continuity G38-2 ~ BATT No continuity G38-5 ~ ASC relay terminal 1 Continuity G38-5 ~ G38-13 No continuity G38-5 ~ Frame No continuity G38-5 ~ BATT No continuity ASC relay terminal 2 ~ Frame Continuity