Toyota — Service Manual Change History

19-56 19-56 Electrical System Troubleshooting Error code 15-3 Disconnect the battery negative terminal, then inspect and repair disconnection of G39 and G36 and any water entry. Reconnect the connectors and the battery negative terminal, then repeat the operations c to e below several times and check whether an error occurs. c Turn the ignition key switch ON (engine stopped) d Operate the accelerator pedal ON/OFF (several times) e Turn the ignition key switch OFF No error Connector contact defect Error NG Inspection 1: NMR and idle switch individual inspection NMR switch defect Idle switch defect OK NG Inspection 2:

Carry out harness continuity and short circuit inspection Harness defect OK Inspection 3: Inspection of the status of the NMR and idle switches in the controller ANL.: I/O ENGINE CTRL 1/3 NG ASC controller defect OK Refer to and carry out mechanical system inspection items such as link catching or switch position adjustment. Inspection 1: Carry out an NMR and idle switch individual inspection. Ignition key switch OFF, disconnect G36, connect G39 Standard: (Switch side) G36 Inspection 2: Inspect for continuity and short circuiting of the harness. Ignition key switch OFF, disconnect G36 and G39 Standard:

Section 19 Switch OFF Switch ON G36-1 ~ G36-2 No continuity Continuity G36-3 ~ G36-4 No continuity Continuity G39-12 ~ IG No continuity G39-15 ~ IG No continuity