OM2203 Safety - Section 22 Warnings and Cautions Page 22-7 A product identification plate is located on the frame in front of the right side front wheel and shows the Truck Model Number, Maximum G.V.W. and Product Identification Number (PIN). The Product Identification Number (PIN) consists of 19 total characters. The first and last charac- ters are tamper preventative symbols (*). The remaining 17 alpha/numeric characters are used to identify 5 characteristics of the machine. The 5 characteristics are detailed below. WMC - Character positions 1, 2 and 3 identify the Worldwide Manufacturer Code (WMC). The WMC designates the manufacturer of the prod- uct.
Komatsu brand products are identified with the letters KMT. MDS - Character positions 4, 5, 6, 7 and 8 identify the Machine Descriptor Section (MDS). The MDS code identifies general information regard- ing machine specifications. The MDS is a code for the machine type and model. CL - Character position 9 identify the Check Let- ter (CL). The CL is used to verify the accuracy of the individual PIN. FC - Character positions 10 and 11 identify the Factory Code (FC). The FC identifies the Komatsu factory in charge of claims for the prod- uct. The FC for electric drive trucks is 61. SN - Character positions 12, 13, 14, 15, 16, and 17 identify the Serial Number (SN).
The SN is a unique sequential number.