Komatsu — STEERING WHEEL AND CONTROLS

Operation - Section 3 OM3035.2 02/03 Page 3-14 Operator Cab and Controls OPERATOR CAB AND CONTROLS STEERING WHEEL AND CONTROLS The steering wheel (1, Figure 3-2) will telescope "in" and "out" and adjust through a tilt angle to provide a comfortable wheel position for most operators. HORN BUTTON The horn (2, Figure 3-2) is actuated by pushing the button in the center of the steering wheel. Operation of the horn should be verified before moving the truck. Observe all local safety rules regarding the use of the horn as a warning signal device before starting engine and moving the vehicle.

TELESCOPE LOCK RING The Telescope Lock Ring (3, Figure 3-2) around the horn button locks/unlocks the telescoping function of the steering column. Rotating the ring 90° - 180° counterclockwise (L.H. rotation), releases the column to move "in" or "out". Rotating the ring clockwise (R.H. rotation), locks the column in the adjusted posi- tion. TILT WHEEL LEVER FIGURE 3-2. STEERING WHEEL AND CONTROLS Adjust the tilt of the steering wheel by pulling the tilt adjustment lever (4, Figure 3-2) toward the steering wheel and moving the wheel to the desired angle. Releasing the lever will lock the wheel in the desired location.

TURN SIGNAL / HEADLIGHT DIMMER The Turn Signal Lever (5, Figure 3-2) is used to acti- vate turn signal lights and to select either high or low headlight beams. Move the lever upward to signal a turn to the right. INDICATOR LIGHTS. Move the lever downward to signal a turn to the left. Moving the lever toward the steering wheel changes Headlight beam. When high beams are selected, the indicator in the top, center of the instrument panel will illuminate. l a the instrument turn direction NT PANEL & al a ering hen cator a ing en tor m ent