Komatsu — INDICATOR LIGHT SYMBOLS

Operation - Section 3 OM3035.3 02/03 Page 3-36 Instrument Panel & Indicator Lights A6. NOT USED Not currently used. Reserved for future use or options. \ B6. NOT USED Not currently used. Reserved for future use or options. C6. NOT USED Not currently used. Reserved for future use or options. D6. Service Engine (Cummins) When the keyswitch is turned "On" (before starting engine), this amber "Service Engine" indi- cator light will illuminate for about 2 seconds and then turn off, if no "faults" are detected in the system. If this indicator remains "On" (or flashes when equipped with Centry™ Fuel Con- trol system), alert maintenance personnel as soon as possible .

Komatsu Engines w/Centry™ Fuel Control - This indicator monitors the Centry™ fuel system. During engine operation, if a "fault" is detected in the system, the light will turn ON and stay on for "Warning" faults, or it will turn ON and FLASH for more "Severe" faults that can affect engine operation and require immediate attention. "Warning" faults (light ON) are ones that require attention in the near future, but in most conditions will not greatly affect governing performance. "Severe" faults (light FLASHING) are ones that require immediate attention, because Centry™ governor performance could be significantly affected, resulting in a backup mode of operation .

Active fault conditions MUST be corrected as soon as possible. Refer to "Lamp Test/Diagnostic Test Switch" for additional description of this light's function. E6. NOT USED Not currently used. Reserved for future use or options.